A queen-over-queen bunk bed can add two full-width sleeping surfaces without using the floor area of two separate queen beds. The key buying decision is not the label alone: confirm the room, ceiling, access route, mattress thickness, and listed weight capacity for the exact model.
Shop verified queen and adult bunk beds or view the Queen over queen metal bunk bed with storage shelf.
Quick specifications for the current verified model
| Configuration | Queen over queen, black metal frame |
|---|---|
| Overall dimensions | 82.7 L Γ 63 W Γ 64.6 H inches |
| Listed upper-bed capacity | 350 lb |
| Listed lower-bed capacity | 600 lb |
| Recommended mattress thickness | 6 inches upper; 8 inches lower |
| Delivery | Ships in two cartons; cartons may arrive separately |
1. Measure the complete room, not only the mattress
Start with the listed 82.7-by-63-inch footprint. Leave practical space for the ladder, the storage shelf, bedding changes, and a clear walking route. Measure baseboards and any projecting trim because they can keep the frame away from the wall.
Next, compare the 64.6-inch frame height with the finished ceiling height. Include the upper mattress when judging headroom. A mattress that is thicker than the model guidance can reduce usable guardrail height, so use the exact recommendation on the product page.
2. Check whether it fits through the delivery route
Measure the narrowest doorway, hall turn, stair landing, and elevatorβnot just the bedroom. This model is delivered in two cartons. Confirm that both cartons can reach the assembly area and keep the route clear on delivery day. Do not assume both cartons will arrive at exactly the same time.
3. Match each sleeper to the listed capacity
The current verified model lists 350 lb for the upper bed and 600 lb for the lower bed. Treat those as separate limits. Allow for the sleeper and mattress, and follow the assembly and use instructions supplied with the bed. The larger lower-bed capacity does not increase the upper-bed limit.
4. Choose the mattress after choosing the frame
βQueen over queenβ describes the sleeping-surface sizes, but mattress thickness still matters. The current model recommends a 6-inch upper mattress and an 8-inch lower mattress. Confirm mattress dimensions and thickness before ordering; mattresses are not automatically included unless the product page expressly says so.
5. Decide whether the shelf and ladder placement suit the room
The storage shelf can help keep frequently used items off the floor, but it also affects how the bed sits in the room. Review the product images, ladder position, nearby outlets, windows, doors, and ceiling fixtures before assembly. Plan the final orientation before opening all hardware packages.
6. Plan assembly before delivery
- Assemble on a level floor in the final room where possible.
- Check every carton and hardware list before beginning.
- Use the supplied instructions and do not substitute fasteners.
- Recheck connections after assembly and periodically during use.
- Keep the product information for future reference.
Queen-over-queen bunk bed checklist
- Room footprint measured, including trim and walking space.
- Ceiling and upper-sleeper headroom checked.
- Doorway, hallway, stair, and elevator access measured.
- Upper and lower sleeper loads checked separately.
- Upper and lower mattress thicknesses confirmed.
- Ladder, shelf, outlets, windows, and lights considered.
- Two-carton delivery and assembly time planned.
Frequently asked questions
Can adults use a queen-over-queen bunk bed?
Use depends on the exact model and the listed capacity for each sleeping surface. The current verified Efforest model lists 350 lb for the upper bed and 600 lb for the lower bed. Check each sleeper and mattress against the applicable limit.
How much ceiling height do I need?
There is no single answer for every room. Start with the 64.6-inch frame height, add the upper mattress, then allow comfortable seated headroom above the upper sleeper. Measure the finished ceiling and consider lights, fans, and sloped areas.
What mattress thickness should I use?
For the current verified queen-over-queen model, the recommendation is 6 inches on the upper bed and 8 inches on the lower bed. Follow the exact product specification because a thicker upper mattress can reduce effective guardrail height.
Does the bunk bed arrive in one box?
No. The current model ships in two cartons, and separate cartons may arrive at different times.
Are mattresses included?
Do not assume mattresses are included. Check the live product page and selected configuration for the current package contents before ordering.
Check the current Queen over Queen bunk-bed price and availability
Specifications and inventory can change. Use the live product page as the final source for the selected configuration, price, and availability.










































































Share and get 15% off!
Simply share this product on one of the following social networks and you will unlock 15% off!